Impact of Multimedia Traffic Characteristics on ATM Network Configuration

This paper proposes a new topological designmethod, named BXCQ, which optimizes logical networkconfiguration while guaranteeing Quality-of-Service(QoS) requirements for each service class in an ATMnetwork. The BXCQ method determines the optimum logicalnetwork topology associated with each service class soas to minimize network cost. In our previously proposedFull-Net architecture these different logical topologies can be suitably mapped at the sametime on the same ATM physical network by using theVirtual Channel Handler (VCH) to create differentlogical interconnection networks. The BXCQ method allows us to clarify the relations between multimediatraffic characteristics and desirable logical networkconfigurations in Full-Net. Evaluation results suggestthat a service class that is bursty, delay tolerant, and cell loss sensitive with small demandshould be supported by a loop-like topology. This studywill be useful for designing flexible and cost-effectivemultimedia networks that can also adapt to not-yet-known services.     

Determining number of clusters and prototype locations via multi-scale clustering

In clustering algorithms, it is usually assumed that the number of clusters is known or given. In the absence of such a priori information, a procedure is needed to find an appropriate number of clusters. This paper presents a clustering algorithm that incorporates a mechanism for finding the appropriate number of clusters as well as the locations of cluster prototypes. This algorithm, called multi-scale clustering, is based on scale-space theory by considering that any prominent data structure ought to survive over many scales. The number of clusters as well as the locations of cluster prototypes are found in an objective manner by defining and using lifetime and drift speed clustering criteria. The outcome of this algorithm does not depend on the initial prototype locations that affect the outcome of many clustering algorithms. As an application of this algorithm, it is used to enhance the Hough transform technique.     

Preparation of β-Fesi2 thin film by metal organic chemical vapor deposition using iron-carbonyl and mono-silane

β-FeSi₂ films were deposited at 750 °C by a supplying Fe(CO)₅ and SiH₄ simultaneously during metal organic chemical vapor deposition (CVD). Films could be deposited using this precursors system, even though film deposition was not ascertained by the single supply of Fe(CO)₅. Fe(CO)₅ was probably decomposed in gas phases before it reached to substrate surface. It was suggested that a kind of intermediate reactant which was more stable than Fe(CO)₅ created by the simultaneous supply of Fe(CO)₅ and SiH₄ makes Fe-Si films. Epitaxial β-FeSi₂ films were obtained on Si(111) substrates, and neither carbide nor oxide phases were detected on XRD patterns.     

Feasibility of a 1,400 m Span Steel Cable-Stayed Bridge

This paper describes the feasibility of 1,400 m steel cable-stayed bridges from both structural and economic viewpoints. Because the weight of a steel girder strongly affects the total cost of the bridge, the writers present a procedure to obtain a minimum weight for a girder that ensures safety against static and dynamic instabilities. For static instability, elastoplastic, finite-displacement analysis under in-plane load and elastic, finite-displacement analysis under displacement-dependent wind load are conducted; for dynamic instability, multimodal flutter analysis is carried out. It is shown that static critical wind velocity of lateral torsional buckling governs the dimension of the girder. Finally, the writers briefly compare a cable-stayed bridge with suspension bridge alternatives.     

Robustness of linearly solvable Markov games employing inaccurate dynamics model

As a model-based reinforcement learning technique, linearly solvable Markov decision process (LMDP) gives an efficient way to find an optimal policy by making the Bellman equation linear under some assumptions. Since LMDP is regarded as model-based reinforcement learning, the performance of LMDP is sensitive to the accuracy of the environmental model. To overcome the problem of the sensitivity, linearly solvable Markov game (LMG) has been proposed, which is an extension of LMDP based on the game theory. This paper investigates the robustness of LMDP- and LMG-based controllers against modeling errors in both discrete and continuous state-action problems. When there is a discrepancy between the model used for building the control policy and dynamics of the tested environment, the LMG-based control policy maintained good performance while that of the LMDP-based control policy deteriorated drastically. Experimental results support the usefulness of LMG framework when acquiring an accurate model of the environment is difficult.     

Visualization and concentration measurement of a direct-injection hydrogen jet in a constant-volume vessel using spark-induced breakdown spectroscopy

In this work, spark-induced breakdown spectroscopy (SIBS) was employed to investigate the mixing process of a hydrogen jet in a constant-volume vessel. The local fuel concentration of the hydrogen jet was measured at several locations, using a SIBS sensor. A high-speed camera was used to visualize spark discharge fluctuations, and hydrogen jet concentration measurements were conducted simultaneously. Spectrally resolved atomic emissions from the plasma generated by the spark plug were examined to determine the local equivalence ratio. Direct visualization of the spark discharge provided useful information about the influence of spark discharge characteristics related to the spark timing. Using the developed SIBS sensor, atomic emission spectra were obtained from hydrogen H_α at 656 nm and nitrogen N (I) at 501 nm. Comparison of the intensity peaks of atomic emissions from hydrogen and nitrogen allows the local hydrogen concentration in a measured volume to be determined, and hence also the local equivalence ratio. The measurement results demonstrate the local variation in the equivalence ratio throughout the jet and along its axis. From the results, the spatial structure of the hydrogen jet affects the hydrogen/nitrogen mixing and could be clarified with SIBS technique when the spark is discharged.     

Shape memory properties of polypeptide hydrogels having hydrophobic alkyl side chains

Polypeptide hydrogels were prepared by cross-linking of hydrophobically-modified poly[N⁵-(2-hydroxyethyl) l-glutamine] having alkyl side chains –C_nH_2n+1. Chain length of the alkyl group was n = 8, 16, and 18, and their mole fractions in the polypeptide were varied in the range of 0.05–0.16. Shape memory ability of the prepared polypeptide hydrogels was investigated. After deformation at 60 °C, the hydrogel was cooled in order to fix the temporary deformed shape. It was found that crystallization of the alkyl side chains did not occur, and the fixation ability of the hydrogel at 0 °C was low. In the subsequent heating process, the deformed temporary shape spontaneously recovered to the original shape gradually with increasing temperature, in other words, the shape recovery ratio varied with depending on the recovery temperature. From these observations, it was proposed that the shape fixation of the polypeptide hydrogel was achieved by strong segregation of the hydrophobic alkyl chains at low temperature, and the shape recovery of the deformed hydrogel was accompanied by the gradual decrease of the segregation strength with the temperature increase.     

Towards the improvement of thermal efficiency in lignite‐fired power generation: Concerning the utilization of Polish lignite deposits in state‐of‐the‐art IGCC technology

Integrated coal Gasification Combined Cycle (IGCC) is the most advanced technology for coal‐fired power generation. The two‐stage entrained flow gasification process allows for the use of a wide range of coal, as long as the gasification temperature is above the ash melting point of a used fuel. In this gasification technology, lignite, which often has a low ash melting point, can be preferably utilized. However, ash fluidity is also another importance, because the behaviour of molten slag can diminish a stable ash discharge from a gasifier. As the eligibility of coal ash properties is a considerable factor, water physically and chemically kept in lignite (30 – 60% in mass) attributes to deteriorating gasification efficiency, because it causes significant heat loss and increasing oxygen consumption. Developing a thermal evaporative lignite drying method will be a necessary attempt to apply lignite to the coal gasification process. For those preceded objectives, coal and ash properties and drying characteristics of several grades of Polish lignite, extracted from Belchatow and Turow deposits, have been experimentally investigated in a preliminary study evaluating the applicability and consideration for its utilization in state‐of‐the‐art clean coal technology, IGCC. This paper particularly discusses the eligibility of Polish lignite from the perspective of the fusibility and fluidity of ash melts and the fundamental drying kinetics of lignite in superheated steam in the light of water removal. The viscosity of ash melts is measured at high temperature up to 1700 °C. In the drying tests, the significant influence of structural issues, because of the provenance and origin of lignite on the drying characteristics, was found by applying the method of sensitivity analysis of physical propensity. This paper concludes that the investigated Polish lignite has characteristics favourable for utilization in IGCC technology, once the precautions related to its high moisture have been carefully addressed. Copyright © 2016 John Wiley & Sons, Ltd.     

Detection of Buckminsterfullerene in Usual Soots and Commercial Charcoals

Abstract

It was confirmed that soot produced by free burning of small hydrocarbons like benzene and cyclohexane generally contains less than 0.1 ppm of C₆₀. Small, but measurable amounts of C₆₀ were found in two samples of charcoal, providing the first indication of fullerene formation in the solid state.